POWERMATIC OES9138 Oscillating Edge Sander 3HP 3PH 230/460V 1791293

POWERMATIC OES9138 Oscillating Edge Sander 3HP 3PH 230/460V 1791293

$4,499.99 10% OFF ALL POWERMATIC SANDERS AND ACCESSORIES - ends 10/31/20

orCall 386-304-3720

Description

Please note: many products ship straight from manufacturer

POWERMATIC OES9138 Oscillating Edge Sander, 3HP 3PH 230/460V, 1791293

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.   


Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 5 YEAR (for Private Use) / 2 YEAR (for Commercial Use) 

Specifications

ManufacturerPowermatic
ModelOES9138
ConditionNew
Stock Number1791293
Style (Type)Horizontal/Vertical Oscillating Edge
Sanding Belt Size (L x W) (In.)9 x 138-3/4
Belt Speed (FPM)3542
Drum Diameter (In.)4 Outboard, 9 Drive
Platen Size (In.)9-1/2 x 48
Oscillations Per Minute24
Main Table Size (L x W) (In.)48 x 11-3/4
Main Table Tilt (Deg.)5 In, 45 Out
Table Height from Floor (In.)34-1/2 - 40-3/4
End Table Size (In.)18
End Table Tilt (Deg.)40 In, 45 Out
Electrical ControlsMagnetic Starter
Dust Collection Minimum CFM Required (CFM)1,100
Dust Port Outside Diameter (In.)4
Motor Power (HP)3
Motor Phase3
Motor Voltage (V.)230/460
Prewired Voltage (V.)230
Recommended Circuit Size (Amps.)15/10