BETENBENDER Hydraulic Shear Model 10-125

BETENBENDER Hydraulic Shear Model 10-125


orCall 386-304-3720


Please note: many products ship straight from manufacturer BETENBENDER 10' x 10 ga Hydraulic Shear Model 10-125 ** FREE SHIPPING TO COMMERCIAL ADDRESS THAT CAN OFFLOAD**

***SHIPPING IS TO LOWER 48 STATES ONLY. OTHER AREAS PLEASE EMAIL FOR FREIGHT QUOTES.*** BED: Steel one piece box section, stress relieved; welded to side frame insures positive alignment of bed and housings with beam supports that have removable wear tops which allow (1) convenient change to solid top and (2) plates with pin gauging. RAM: Steel, stress relieved. Truss rod construction assures blade parallelism without consuming, short span adjustments. POWER RAKE: allows change of blade rake angle for minimum camber & twist. HYDRO-MECHANICAL HOLDDOWN: firmly grips material to prevent movement and tipping. Optional urethane gripping pad protects soft and polished materials from marking. ALLOY BRONZE GIBS


Stock Number10-125
Capacity - a-36 mild steel (80,000 lb. tensile)10 ga. (3.429 mm)
Capacity - 304 stainless steel (at highest rake)10 ga.
Main motor (h.p.)10
Nominal cutting length120"
Number of holddowns19
Knives (four(4) cutting edges)124" x 1" x 3"
Rake of moving blade (per foot)1/4
Back gauge range36"
Strokes per minute30
Oil reservoir (hydraulic oil included).42 gallons
Shipping weight9,100 lbs.
Overall length145"
Overall width (w/backgauge)60"