DOALL DC-800SA Semi-Automatic Bandsaw

DOALL DC-800SA Semi-Automatic Bandsaw

Contact us for price

orCall 386-304-3720


Please note: many products ship straight from manufacturer DOALL 31.5 inch Semi-Automatic Bandsaw DC-800SA

  • Machine Capacity: w 39.5” x h 31.5″ (1000mm x 800mm)
  • Machine Capacity Round: 31.5" (800mm)
  • Production Level: High
  • Standard Features: 15 HP Band Drive Motor, Hydraulic Shuttle Roller Table and a Programmable Logic Controller for All Machine Functions
  • The DC-800SA Semi-Automatic Continental Series high production, horizontal band saw by DoALL is designed for cutting a wide range of metals on a production basis.
  • If you have operations that do not require indexing, high production or automatic cutting cycles, an affordable DoALL semi-automatic saws is the perfect choice for reliable and long-lasting performance.
  • Once the desired feed rate, blade speed and initial vise opening is set on the Mitsubishi PLC -- a cut is complete, the band shuts off and the head returns to the upright open position and locks. Then the operator must manually reposition the material for another cut.
  • Push Button Control Panel: Ergonomically placed, user friendly push button control panel
  • High-Efficiency Transmission: High-efficiency planetary gear box built to decrease wear and transmit full torque to the saw blade.
  • Hydraulic Chip Conveyor: Adjustable speed auger style conveyor allows for coolant drain from chips before extraction.
  • Coolant Thru Carbide Faced Saw Guide Inserts: Supplies coolant to the blade evenly before and after the cut creating straighter cuts and allowing longer blade life due to coolant being supplied at the tooth tip.
  • Efficiently Designed Hydraulic System: Engineered low pressure system allows for a smoother and quieter operation which aids in longer component life and easy accessibility for maintenance.
  • Band Wheels: 28 Degree lay back head design minimizes band twist which causes band fatigue and also allows a smaller foot print. Flange cast steel wheels insure band tracking to prevent tooth set lost.
  • Material Positioner: Hydraulic shuttle roller table assist's operator in positioning material which decreases setup time.
  • Movable Saw Guide Arm: Electrical driven movable guide arm with hydraulic lock system aids the operator in placement of the arm close to the cut to minimize blade deflection.
  • Hydraulic Blade Tension: Hydraulically driven lever type design eliminates possible error of over/under tightening the band for maximum cutting rates and band life.
  • Back-up Bearing/Inserts: Supports the back of the saw band allowing the creation of band preload which aids in reducing vibration while cutting and increasing blade life.
  • Warranty: One year parts and service subject to the terms and conditions. 10 year manufacturer’s warranty available (DoALL Cut Above 10 Year Warranty).


  • Programmable Logic Controller (PLC) for all machine functions
  • Feed rate/feed force saw head control
  • Infinite band speed controlled variable frequency drive
  • Hydraulic retractable shuttle roller table for material
  • positioning with rapid and creep speed control
  • Full stroke vices with outboard front vise
  • Variable vice pressure control
  • Hydraulic set, zero clearance, coolant through, carbide faced saw guide inserts with lead in rollers
  • Adjustable power driven band cleaning brushes with coolant flush line attached
  • Halogen work light
  • Electric motor driven movable saw guide arm
  • Blade shock proof device
  • Flushing hose for machine wash down and auxiliary coolant nozzles
  • Hydraulic band tension
  • Hydraulic adjustable speed auger design chip conveyor
  • One shot column lubricator
  • Saw band break/stall motion detector shut off switch
  • Band door interlocks
  • Operation and parts manuals on USB stick
  • One 6.5 ft. (2M) idler input conveyor
  • Maintenance tool kit
  • Complimentary DoALL Cutting Fluids package
  • One (1) complimentary DoALL Bi Metal saw blade


  • 10 ft. idler conveyor
  • 5 ft. idler conveyor with filler plates
  • Out of square detection
  • Additional USB stick of manuals
  • Laser line
  • A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards.
  • DoALL Cut Above 10 Year Warranty Investment

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.



Stock NumberDC-800SA
Cutting Capacity - Round31.5" (800mm)
Cutting Capacity - Rectangle (W x H)39.3 x 31.5" (1000x800mm)
Saw Blade - Width x Length2.625" x 347"
Band Drive - Motor HP15 HP
Band Drive - Band Speed52-275 fpm
Band Drive - Band TensionHydraulic
Hydraulic System - Motor HP3 HP
Hydraulic System - Reservoir Size22.5 Gallon
Coolant SystemFlood
Coolant System - Motor Hp1/4 HP
Coolant System - Reservoir Size58 Gallon
Voltage Requirement230V-60Hz-3ph, Wye configuration
Total Amp Draw (FLA)61 Amps
Floor Space Dimensions W x L X H172" x 85" x 105"
Material Pass Height28.5"