BAILEIGH Plate Roll PR-409

BAILEIGH Plate Roll PR-409


orCall 386-304-3720


Please note: many products ship straight from manufacturer BAILEIGH Plate Roll PR-409 The PR-409 single pinch hydraulic plate roll from Baileigh Industrial is a great roll former that can form 9 gauge mild steel to a 7” ring on its full length of 4’. The PR-409 is operated entirely by an industrial grade hydraulic system. A 2 hp 220 volt three phase motor controls the system which runs the movement of the back roll as well as the rolling of all three forming rolls. Since all three rolls are driven, this cuts down on forming time that the operator has to spend on each job. The operation of the PR-409 hydraulic plate roll is all done on a convenient foot pedestal. Once the pinch is set the foot pedal contains forward and reverse pedal as well as buttons to control the up and down movement of the back roll. A digital readout is also provided to identify the position of the back roll as well. If you have projects that need to form cones, the PR-409 has an optional coning attachment available. For safety, the PR-409 has emergency stop cable on the front and back of the machine.

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.



ManufacturerBaileigh Industrial
Stock NumberBA9-1006517
Forming Width48"
Capacity (Mild Steel)9 ga. (.150")
Upper Roll Diameter4.75"
Minimum Forming Diameter7.125"
Roll Adjustment BackHydraulic
Wire GroovesYes
Roll Speed5.85 rpm
Motor2 hp
Power Requirement220V / 3-phase
Shipping Dimensions (L / W / H)60" x 37" x 11"
Shipping Weight3,740 lbs