COLE-TUVE Initial Pinch Slip Roll BSR-3-90

COLE-TUVE Initial Pinch Slip Roll BSR-3-90

Contact us for price

orCall 386-304-3720

Description

Please note: many products ship straight from manufacturer 3' x 12 ga. COLE-TUVE Initial Pinch Slip Roll BSR-3-90 The Model BSR Initial-Pinch Rolls are also called Slip Rolls. Their design has gained worldwide acceptance; and although used for bending lighter sheet materials, they are built for durability and efficiency, while still being easy to operate and low in cost. Strong castiron frames are used on all sizes for rigidity and stability. The roll shafts are journalled in long-life bronze bearings. The upper and lower rolls are driven by a brake motor through a heavily proportioned gear assembly, producing a single rolling speed and effecting prompt stopping of the rotation of the rolls. The lower front roll, which is used for clamping the work-piece, and the rear roll, which is used for setting the bending radius, are each adjusted by a single handwheel. Both handwheels are conveniently located for ease of operation. The use of a single handwheel for each adjustment avoids the operator's having to move from one end of the machine to the other to adjust each roll. The rear roll can be readily tilted to facilitate the cone bending procedure. A secure locking device keeps the upper roll in proper position during rolling and is easily released to allow the roll to be swung out for removal of the rolled cylinder. A portable push button control on a trailing lead adds to convenience and ease of operation by allowing the operator to position himself most advantageously. The rolls are grooved for three sizes of round bar. The machine needs only to be anchored and connected to the power supply and is ready to operate. STANDARD EQUIPMENT: Brake motor, Cone bending attachment Electrics for 3/60/220/440 Low voltage at the controls Portable push button control and emergency-stop palm button Handwheels for roll adjustments Lockable swing-out upper roll 3 grooves for 3/8", 1/2", and 5/8" round bar Scale to indicate the positions of the rear roll ITEM: 3' x 12 ga. Initial Pinch Slip Roll MANUFACTURER: COLE-TUVE / SAHINLER MODEL: BSR-3-90

Specifications

ManufacturerCole-Tuve
ModelBSR-3-90
ConditionNew
Stock NumberBSR-3-90
Capacity3' x 12 ga.
Diameter of the Rolls3.54"
Motor HP2
Weight990 lbs.