HE&M VT140HM-60-CTS Semi-Automatic Vertical Bandsaw

HE&M VT140HM-60-CTS Semi-Automatic Vertical Bandsaw

Contact us for price

orCall 386-304-3720


Please note: many products ship straight from manufacturer HE&M 22 inch Semi-Automatic Vertical Bandsaw VT140HM-60-CTS

  • The V140 and VT140HM-60-CTS band saws vary from a vertical blade orientation on the V140 to a forward-canting blade on the VT140 version. The touch screen control, mounted in a swing-away console, allows the operator to enter an angle and the arm will travel to that position and stop.
  • Swing-Away Control Console w/ 7" Touch Screen
  • Powered Programmable Tilt w/ Angle Readout
  • Vise - Full Stroking Main
  • Adjustable Clamping Force
  • Carbide Blade Guides
  • Guide Arm - Powered
  • Variable Blade Speed w/ Readout on Touch Screen
  • Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
  • Idle Base Rollers - 1 Each Side of Base
  • Powered Blade Tension
  • Forward Cut Stop
  • Coolant System - Flood w/ Wash-Down Hose
  • Blade Brush
  • Broken Blade Function
  • Blade Change Interlock
  • Safety Guards
  • 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine


  • Swing-Away Top Clamp - Main Vise
  • Top Clamp - Reduced Capacity Main Vise
  • Vise - 2nd Main
  • Material List w/ Larger 8" Touch Screen
  • Passive "Cut Watcher" System
  • Laser Light System
  • Power Raised Lift Up Rollers
  • Chip/Swarf Removal System - Chip Conveyor
  • Chip/Swarf Removal System - Manual Hand-Crank Chip Conveyor
  • Spray Mist Lubrication
  • Pedestal Mounted Control Console
  • 5' Roller Load Table
  • 10' Idle Roller Load Table
  • 10' Powered Roller Load Table
  • 5' Roller Discharge Table
  • 10' Roller Discharge Table
  • 10' Powered Roller Discharge Table
  • 5' Idle Roller Stock Table
  • 10' Idle Roller Stock Table
  • 10' Powered Roller Stock Table

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.



Stock NumberVT140HM-60-CTS
Capacity - Rectangular0-22" W x 0-30" H
Capacity - Square0-22" (Square)
Capacity - Round0-22" (Diameter)
Motor10 HP
Hydraulic Motor5 HP
Operation TypeSemi-Automatic
Power SourceHydraulic
Blade TypeBandsaw
Blade Size20' 0" L x 1.5" H x .050"
Bandsaw Blade SpeedN/A
Bundle Cut?Yes
Electrical Motor Requirement220V/3PH or 440V/3PH (This is Not a Dual Voltage Machine)