SHARP V-1 Heavy Duty Vertical Knee Mill

SHARP V-1 Heavy Duty Vertical Knee Mill

Contact us for price

orCall 386-304-3720

Description

Please note: many products ship straight from manufacturer

SHARP 12" x 58" Heavy Duty Vertical Knee Mill V-1

  • This model is built for heavy cutting. The boxways on the vertical column and top of base allow extra support to the table under hard machining. The size of the saddle is extra wide to support the table to avoid over hang. The top of the saddle is coated with TURCITE-B for better retention of oil and wear resistant.
  • 12 x 58 ins table, 16 x 40 ins travel
  • Hardened and ground box ways
  • #40 taper, 5 hp spindle motor
  • Digital Variable Speed spindle
  • Power feed table and saddle
  • Motorized rapid knee for easy positioning

Digital Variable Speed Head:

  • Easy speed change. Just turn the knob
  • Machine works on Single Phase or 3 phase motor
  • Low voltage control
  • Safety feature includes preventing self-start after power failure of E stop

TURCITE-B coating Auto lubrication:

  • The top of the saddle is coated with TURCITE-B for better retention of lubricating oil and protects wearing of the slideways after long term usages.
  • The auto lubrication system delivers oil to all the sliding ways through well placed lubricating channels. The system is designed with back flow valves to prevent oil from flowing back towards the reservoir.

Boxways on column and knee:

  • Hardened and ground boxways are designed for the vertical column and the top of the base to offer resistance to the table under heavy machining conditions.

Patented Knuckle Head design:

  • The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)

Better motor shaft support:

  • Roller Bearing Support at the bottom of the motor shaft ensures proper loading, support and alignment of the spindle. It also prevents the distortion of the belts due to tension from long years of milling operation. 


   STANDARD ACCESSORIES:

  • Power feed table and saddle
  • Motorized rapid knee positioning
  • Coolant System
  • Front and Rear Rubber Way Cover
  • Auto-lube System
  • Rubber Way Cover at back of Saddle
  • Halogen Worklight


OPTIONAL ITEMS:

  • 440V Transformer
  • Power Draw Bars
  • “Align” Power Draw Bar w/Foot Pedal Control
  • “Maxi Torque Rite” Power Draw Bar
  • 6 in. Kurt Vise with Swivel Base
  • Right Angle Milling Attachment w/ Arbor (#40)
  • Optional Riser Block (Riser blocks, 4 ins, 6 ins, 8 ins , sizes): The optional rise block that sits between the vertical column and the overarm raises the distance from spindle to top of table. This allows taller work piece to be placed on the table for machining instead of getting a larger machine.
  • Drill Chuck & Drill Arbor
  • Clamping Kit (52 pcs/steel racks)
  • Digital Readout System


Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts 

Specifications

ManufacturerSharp
ModelV-1
ConditionNew
Stock NumberV-1
Table Size12 x 58 in.
T-slots (No., Size, Pitch)3, 5/8, 2.5 in.
Table Travel : X Longitudinal40 in.
Table travel : Y Cross16 in.
Quill travel: Z Vertical5 in.
Ram Travel17.8 in.
Knee travel : Vertical16 in.
Spindle Nose to Table Top2-18 in.
Spindle Nose TaperNST #40
Spindle Variable Speed Range70-4,000 rpm
Spindle Motor (220V/440V)5 HP
Quill Feed (Inch/Min)(3 speeds)0.015, .003, .006 in.
Quill Diameter4.12 in.
Head Swivel Angle360°
Head Tilt Angle (L/R)+/- 90°
Head Tilt Angle (Up/Down)+/-45°
Floor Area (W x D x H)6.91 x 6.25 x 8.33 ft
Approximate Weight4,500 lbs.
Power Consumption (220V)3 KVA/8 amps
Power Consumption (440V)3 KVA/4 amps