VICTOR 1440GLV Digital Variable High Speed Precision Lathe

VICTOR 1440GLV Digital Variable High Speed Precision Lathe

Contact us for price

orCall 386-304-3720


Please note: many products ship straight from manufacturer

VICTOR 14" x 40" Digital Variable High Speed Precision Lathe 1440GLV

  • Headstock gears are made of chrome-moly steel
  • Hardened and precision ground spindle and headstock gears
  • A forced lubrication system lubricates all headstock gears and bearings
  • Bed is made of high tensile cast iron FC30
  • Hardened and ground bed ways
  • Leadscrew is equipped with a torque limit safety device
  • Feed rod has a built-in overload safety clutch
  • An interlocking device in apron to prevent simultaneous engagement of auto feeding and threading operations
  • Full length foot brake
  • Powerful 5 HP main motor
  • 2-step infinitely variable speed - low gear: 36~300 rpm, high gear: 300~2,200 rpm
  • Digital spindle speed display
  • Easy spindle speed change while running by a knob control
  • Equipped with high performance and low-noise variable-frequency drive (VFD).


  • Halogen work light
  • Tool box
  • Coolant system
  • Dead Centers M.T. #3
  • 4-way tool post
  • Chuck cover with micro switch
  • Reducing sleeve
  • Instruction manual and parts list
  • Full length splash guard
  • Threading dial indicator
  • Gap bed
  • Leveling screws and pads


  • Digital readout (DRO)
  • Steady rest
  • Taper turning attachment
  • 3-jaw scroll chuck
  • Follow rest
  • Micro carriage stop
  • 4-jaw independent chuck
  • Quick change tool set
  • 5C lever type collet closer
  • Face plate D1-4
  • Live center M.T. #3
  • 5C collet set

Design and Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.



Stock Number1440GLV
Max. swing over bed14"
Max. swing over cross slide8-3/4"
Max. swing over gap20-1/2"
Width of gap7-5/8"
Width of bed9"
Max. distance between centers40"
Spindle bore diameterØ1-9/16"
Spindle bore taperM.T. #5
Taper of center in sleeveM.T. #3
Spindle noseD1-4 Camlock
Number of spindle speedsVariable - 2 steps
Range of spindle speeds (rpm)Low gear : 36 ~ 300 rpm; High gear : 300 ~ 2,200 rpm
Leadscrew diameter15/16"
Pitch of leadscrew4 TPI
Range of longitudinal feeds0.0026" ~ 0.0368"/rev. (0.066 ~ 0.935 mm/rev.)
Range of cross feeds0.0009" ~ 0.0123"/rev. (0.022 ~ 0.312 mm/rev.)
Inch threads4 ~ 56 TPI x 32 kinds
Metric threads0.4 ~ 7 mm x 32 kinds
Cross slide travel7"
Compound slide travel3-3/4"
Taper of centerM.T. #3
Quill travel4"
Quill diameterØ1-9/16"
Main motor5 HP / 3 Phase
Coolant pump1/8 HP
Shipping dimensions (L x W x H)76" x 32" x 63"
Net weight1,600 lbs.
Gross weight1,810 lbs.