VICTOR 618E Super Precision Digital Threading Control Toolroom Lathe

VICTOR 618E Super Precision Digital Threading Control Toolroom Lathe

Contact us for price

orCall 386-304-3720


Please note: many products ship straight from manufacturer

VICTOR 6" x 18" Super Precision Digital Threading Control Toolroom Lathe 618E

  • Super-precision toolroom lathe with Digital Threading Control is driven by a smooth 3 HP frequency controlled motor that runs virtually vibration free and extremely quiet. Easy to use LCD touchscreen to simplify threading operations by selecting target TPI or mm pitch on the screen. DRO capabilities are built-in as standard. By eliminating the traditional threading gearbox, Victor 618e toolroom lathe is easy to maintain, yet provides superior accuracy and performance.
  • Digital Threading operations are microprocessor controlled and carried out by synchronized spindle speed and servo motor driven leadscrew
  • LCD touchscreen to select thread pitch (TPI or mm) with no gears to change
  • DRO functions integrated into LCD panel features linear scales on X & Z axis
  • Infinitely variable spindle speeds from 50 ~ 4,000 rpm
  • The spindle is mounted in high precision preloaded angular contact ball bearings
  • Hardened and ground alloy tool steel bed ways
  • Full bearing carriage with Turcite-B slideway bearing material between carriage and bed
  • Fast lever collet chucking with a single movement
  • Independent infinitely variable feeds control on carriage and cross slide
  • Automatic thread length control with fine adjustable stops for accurate threading
  • Quick-action tool post slide for threading is instantly cleared from work
  • 5C lever type collet closer standard
  • 3 HP frequency controlled motor (inverter drive)
  • Digital Threading LCD Panel: The leadscrew is driven directly by a servo motor. Through operation of interface, a spindle decoder is used to transfer the motion of leadscrew to rectilinear one. The LCD touchscreen shows the data that is applied to the control panel.
  • Rapidly returning to the origin is executed according to the principle of temporarily coming off the tracking mode.
  • Feed rate per minute of auto feed is calculated with MODBUS communication protocol from interior message data of the converter, therefore it enhances greater cutting precision.


  • LCD touchscreen with digital threading system
  • DRO functions integrated into the LCD touchscreen
  • Variable frequency drive
  • 5C lever type collet closer
  • Tool holder
  • Tailstock
  • Coolant system
  • Halogen work light
  • Chuck cover with limit switch
  • Leveling screws and pads
  • Manual and parts list


  • 6" zero-set 3-jaw chuck with 4º taper back plate
  • Chip and coolant shield (High impact resistance Lexan Polycarbonate resin)


  • Tool setting gauge
  • 5C collet fixture plate
  • Chip and coolant shield
  • Vertical cut-off slide
  • Steady rest
  • Follow rest
  • Face plate
  • Angle plate
  • Taper attachment
  • Radius turning attachment
  • 6" zero-set 3-jaw scroll chuck with 4º taper back plate
  • 6" 4-jaw independent chuck with 4º taper back plate
  • Micro carriage stop with indicator
  • 4-position indexable tool post
  • Rear tool holder slide assembly
  • Step chuck and closer
  • Threaded positive stops
  • Universal collet stop
  • 5C collet set
  • Fixture plate
  • 5C headstock center
  • Drive plate
  • Drive dog
  • Expanding collet and pads
  • Knurling holder
  • Turning & facing holder
  • Drilling & boring bar holder
  • 6-station turret
  • Bed length indicator
  • Live center
  • Quick change tool post

  • Expanding Collet
  • Vacuum Chuck
  • Hydraulic Chuck
  • Chuck Back Plate
  • 6" 3-Jaw Chuck
  • Lathe Dog
  • Face Plate
  • Pneumatic Chuck
  • Precision Diaphragm Chucks
  • Step Chucks
  • Four Station Turret
  • Follow Rest
  • Steady Rest
  • Vertical Cut-off Slide
  • Quick Change Tool
  • Radius Turning Attachment
  • Taper Turning Attachment
  • Rear Tool Holder Slide Assembly

Design and Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.



Stock Number618E
With jaw chucks6"
With expanding collets3"
With round 5C collets1-1/16"
With hexagon 5C collets7/8"
With square 5C collets3/4"
With step chucks1-1/16” to 6”
Spindle nose diameter2.189"
Spindle nose I.D. / O.D.5C / 4º taper
Hole through spindle1-1/4"
Variable spindle speeds0 ~ 4,000 rpm (5C Collet) / 0 ~ 3,000 rpm (6” 3-Jaw Chuck)
Swing over carriage9"
Distance between center18"
Swing over cross slide6"
Swing over bed11"
Carriage power feed range5/16” ~ 7”
Cross slide power feed range3/16” ~ 4”
Cross slide travel6"
Quick-action compound slide travel0.1"
Compound slide travel3"
Inch threads3.175 ~ 500 TPI (digital threading system)
Metric threads0.55 ~ 6.55 mm (digital threading system)
Tailstock spindle diameter1.358”
Tailstock spindle taperM.T. #2
Tailstock spindle travel3-3/4"
Inverter spindle motor3 HP, 220V, 3PH
Coolant pump:1/8 HP
Feed inverter motor1/2 HP
D.C. feed motor110V, 70W
Machine dimensions (LxWxH):73” x 30” x 67”
Gross weight: 2,640 lbs.