GMC Heavy Duty Precision Gap Bed Lathe GML-2060

GMC Heavy Duty Precision Gap Bed Lathe GML-2060


orCall 386-304-3720


Please note: many products ship straight from manufacturer

GMC 20" x 60" Heavy Duty Precision Gap Bed Lathe GML-2060

  • ISO 9001 certified
  • Large spindle bore 3-1/8”
  • Heavy Duty spindle D1-8
  • Heavy Duty guideway width 12”
  • Heavy Duty main motor 10HP
  • 16 spindle speeds from 25-1,800 rpm, 12 speeds
  • 60 kinds of inch threads, and 41 kinds of metric threads
  • Threading and feeding rate change without changing gears
  • Spindle is balanced, hardened and precision ground
  • Spindle is supported at 3-point by high precision bearings
  • All gears and shafts are hardened and precision ground
  • Guideways induction hardened and precision ground
  • Automatic lubrication system in headstock and feed box


  • Free Taper turning attachment, , installed
  • Free SINO DRO, installed
  • Chuck guard with safety shut off
  • Carriage Stop
  • 10” 3-jaw chuck with top reversible jaws, direct mount
  • 12” 4-jaw chuck, direct mount
  • 14” Face plate
  • 1/2”-6” steady rest with roller jaws
  • 3” follow rest
  • Removable gap
  • 4-way tools post
  • Foot brake
  • Halogen Work light and coolant system
  • Full length splash guard
  • Dead centers
  • Thread chasing dial
  • Tool box and leveling pads 


  • 5-C Hand Lever Type Collet Closer, free install: $1,850.00
  • ¾ to 10-1/2” large steady rest with roller jaws: $995.00
  • PART#900-0014: 33 Piece 5C Collet Set, from 1/16 to 1-1/16” by 32ndth: $350.00
  • PART#900-0051-300: ALORIS Type QC Tool Post Set , 6 pieces: $575.00
  • PART#900-0050-04: Live Center: $165

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.



ManufacturerGMC Machine Tools
Stock NumberGML-2060
Max. swing over bed20"
Max. length of workpiece60"
Max. swing over cross slide12-1/2"
Max. Swing in gap29-1/8"
Width of Bed12"
Effective length in gap to spindle6"
Effective length in gap to chuck jaws3-1/2"
Spindle bore3-1/8” , D1-8
Taper of spindle centerM.T. #7
Spindle speeds25-1,800 rpm / 12 steps
Longitudinal feeds0.0011-0.063 IPR, 42 kinds
Cross feeds0.0003-0.018 IPR, 42 kinds
Inch threads2-112 TPI, 60 kinds
Metric threads0.1-14 mm , 41 kinds
Module threads0.1-7mm, 34 kinds
Diametral pitch threads4-112DP , 50 kinds
Max. travel of top slide5"
Max. travel of cross slide11-1/4"
Spindle length w/o chuck17-1/2"
Leadscrew length X TPI1-1/4” x 4 TPI
Diameter of tailstock quill2-3/8"
Max. travel of tailstock quill5-1/8"
Taper of quill centerM.T. # 4
Main motor10HP, 220V or 440V, 3 phase
Coolant pump motor1/8 HP, 220V, or 440V, 3 phase
Net Weight, approx.5,750 lbs.
Overall Dimensions108” x 43” x 59”